How to Get a Disposable Vape to Stop Spitting

Hey there, vape enthusiasts! Imagine you're all set for a smooth, flavorful draw from your disposable vape, and suddenly, you get a hot, unpleasant surprise of e-liquid in your mouth. That's as annoying as it sounds. How to get a disposable vape to stop spitting? Let's dive in.

Why Is a Disposable Vape Spitting

This section explores the multifaceted reasons why disposable vapes spit, offering a comprehensive analysis that benefits novices and seasoned users to combat spitting effectively.

Understanding the Internal Mechanics

In short, disposable vapes consist of a battery, a coil (heating element), and a wicking system soaked with e-liquid. Most Crystal disposable vapes containing the Crystal Bar, SKE S5000, Icon Bar, or Strip Bar follow the same frame structure with an innovative mesh coil technology.

When you inhale, the coil heats up, vaporizing the e-liquid. However, if the balance among these components is off – say, the coil isn't heating properly, or the wick is overly saturated – it disrupts the vaporization process, leading to vape spitting.

The Over-Saturation Conundrum

At the core of many vape spitting issues lies the problem of over-saturation. When the wicking material in your disposable vape, typically made of cotton, becomes excessively saturated with e-liquid, it can't vaporize the liquid fast enough. This leads to a situation where, upon heating, the e-liquid expands rapidly and spits out of the vape mouthpiece. It's a bit like putting too much water in a kettle, which leads to spillover once it boils.

Inhalation Techniques and Their Impact

How you inhale can significantly influence vape spitting. Aggressive or rapid inhalation can create an excess vacuum within the vape device, drawing in more e-liquid than the coil can vaporize. This is akin to sucking on a straw with too much force, where the liquid rushes up faster than you can drink it.

The Role of E-Liquid Properties

Also, the viscosity of vape liquid plays a crucial role. E-liquids with a higher VG (Vegetable Glycerin) content are thicker and less likely to flood the coil, reducing spitting risk. Conversely, thinner e-liquids with higher PG (Propylene Glycol) levels can more easily oversaturate the wick, especially if the vape is used irregularly.

Temperature and Power Settings

Be clear, the power setting affects the temperature of the coil. Insufficient power and too-low temperature results in inadequate heating, which means the e-liquid doesn’t vaporize completely, increasing the likelihood of vape spitting.

There exists a delicate balance – too much power can burn the vape liquid, while too little leaves it under-vaporized.

Coil Condition and Maintenance

A worn-out or gunked-up coil can't heat the e-liquid efficiently, leading to incomplete vaporization and vape spitting.

By understanding these various factors – from the mechanics of disposable vapes to the way users vape – you can better identify the causes of vape spitting and take steps to prevent it.

How to Stop Disposable Vape Spitting

1. Flick the Cartridge with Precision

Hold your disposable vape firmly and flick it briskly downwards. This action helps to expel any excess e-liquid trapped in the coil area. Similar to tapping a thermometer to reset it – a swift, sharp motion is often all it takes to get things back on track.

2. Mastering the Art of Refilling

Aim to fill the cartridge just below the maximum line to give the e-liquid room to expand. It’s paramount to allow for the displacement caused by the insertion of the coil or other components.

3. Pre-Firing Technique

Pulse the fire button for a few seconds before taking a puff. Imagine warming up your car engine on a cold day. This step helps to vaporize any excess e-liquid possibly pooled around the coil. The key is in the duration – too long might burn the coil, and too short might not be effective.

4. Adjusting Inhalation and Airflow

Finding the right balance here is crucial. If you inhale too sharply, you risk drawing more e-liquid into the coil than it can vaporize. Experiment with gentler, slower drags and observe how your disposable vape responds. Regarding airflow, start with a more restricted flow and gradually increase it until you find a setting that provides a satisfying vape without spitting.

5. Optimal Power Settings

The ideal power setting depends on the resistance of your vape coil and the thickness of your e-liquid. Higher VG e-liquids usually require more power to vaporize efficiently. If you’re experiencing vape spitting, incrementally increase the power. Meanwhile, be vigilant about not exceeding the recommended wattage for your coil.

6. Coil Management

Always allow sufficient time for the e-liquid to fully saturate the wicking material before firing after installing a new coil. Regularly check the vape coil for signs of wear or gunk buildup. A coil past its prime is more likely to cause vape spitting and other burnt issues.

7. Choosing the Right E-Liquid

When selecting e-liquids, keep in mind the viscosity of e-liquids and be mindful of the PG/VG ratio as e-liquids with a higher PG content tend to be thinner and may require lower wattage settings to vaporize properly. also consider the nicotine strength, as higher nicotine concentrations can impact the throat hit and overall vaping experience.

8. Mouthpiece Protection

Covering the mouthpiece while not in use is a simple yet effective strategy. This prevents debris and dust from getting into the disposable vape, which can mix with the e-liquid and cause clogging or vape spitting. In addition, covering the mouthpiece during windy can prevent excess air from disturbing the e-liquid's equilibrium in the cartridge.

9. Regulating Vape Temperature

If your disposable vape allows temperature control, use it to your advantage. Start with a lower temperature and gradually increase it until you find the optimal setting for vaporizing the e-liquid efficiently without causing vape spitting or a burnt taste.

10. Inspecting Seals and O-rings

Regularly replace the seals and O-rings if they show any sign of wear or damage or are loose. These components are crucial for maintaining the integrity of disposable vape's vacuum and preventing e-liquid leaks, which can contribute to vape spitting.

11. Fine-Tuning Airflow

Revisiting airflow settings is vital. Try reducing the airflow to create a tighter draw if spitting occurs. This can increase the vaporization efficiency and reduce the likelihood of e-liquid being drawn into the vape mouthpiece. However, pay attention that too tight an airflow can lead to other issues like a harsher throat hit or overheating.

12. Choosing an Appropriate Drip Tip

A longer or curved drip tip can help prevent vape spitting by increasing the distance the vapor must travel before reaching your mouth, thereby allowing more time for the vapor to cool and preventing e-liquid droplets from the vaping journey.

13. Regular Chimney Cleaning

The tube that connects the vape coil to the mouthpiece should be kept clean in case of e-liquid residue. Use a small brush or a piece of cloth to gently clear any condensation or residue.

14. Re-Wicking Process Skills

Ensure the wick is neither too tight nor too loose within the coil. A tight wick can restrict e-liquid flow, leading to dry hits, while a loose wick can cause flooding and vape spitting. Aim for a snug fit and ensure the wick ends are properly trimmed and positioned.

By meticulously following these enhanced tips, vapers can effectively reduce and manage vape spitting issues. Each tip, from the way you fill your cartridge to the regular maintenance of your vape device, is a step towards a smoother, spit-free vaping experience.

In short, remember, taming your disposable vape's spitting habit is about understanding the whys and hows. So go ahead, apply these tricks, and enjoy the pure, unadulterated joy of vaping. Happy vaping!