WARNING: This product contains nicotine. Nicotine is an addictive chemical.
YOUTH PREVENTION(21+): For Existing Adult Smokers And Vapers Only.
ske

How to Unburn a Vape

7/3/2025, 9:02:23 AM 17

A burnt-tasting vape can ruin your vaping experience in seconds. Whether you're using a disposable vape, a pod system, or a refillable tank, encountering that harsh, scorched flavor is a common but avoidable issue. If you’ve been searching for how to unburn a vape, this guide provides practical, device-specific solutions to restore flavor and prevent it from happening again.

What Causes a Burnt Vape Hit?

Before fixing a burnt vape, it helps to understand the root causes. Most burnt hits come from:

  • Dry wick: When the cotton or ceramic wick isn’t saturated with e-liquid.
  • Chain vaping: Vaping too frequently without giving the wick time to reabsorb liquid.
  • High wattage: Using wattage settings that are too high for your coil resistance.
  • Old or damaged coils: Coils degrade over time and eventually burn the wick.

How to Unburn a Vape Based on Device Type

1. Refillable Pod Systems and Vape Mods

If your device uses replaceable or refillable pods or tanks, try these steps:

Step 1: Stop Vaping Immediately

Continuing to vape will worsen the damage to your wick or coil.

Step 2: Check and Prime the Coil

Remove the coil or pod. If you see darkened or burnt cotton, it may be too far gone. If not:

  • Drip a few drops of e-liquid directly into the coil’s cotton.
  • Let it sit for 5–10 minutes before reassembling the device.

Step 3: Lower the Wattage

If you’re using a mod, reduce the wattage to within the coil’s recommended range.

Step 4: Take Gentle Puffs

Take light, spaced-out draws to help re-saturate the wick without overheating it.

2. Disposable Vapes

While harder to fix due to their closed design, you may still be able to recover flavor:

Option 1: Let the Vape Rest

Leave it upright for 15–30 minutes. This allows the internal wick to reabsorb any remaining e-liquid.

Option 2: Blow Through the Mouthpiece

Gently blow into the mouthpiece while covering the airflow hole. This can help push juice back into the wick.

Option 3: Warm the Device Slightly

Warm the vape between your hands or leave it in a warm (not hot) spot. This thins the e-liquid and improves wick saturation.

Note: If the burnt taste persists, the coil is likely irreparably damaged, and replacement is your only option.

Tips to Prevent Burnt Hits

  • Always prime new coils before first use.
  • Avoid chain vaping, especially with mesh coils or small pods.
  • Don’t run low on e-liquid—keep tanks and pods at least half full.
  • Use the right wattage range for your coil.
  • Choose quality e-liquid—cheap or overly sweet juices can gunk coils faster.

When to Replace the Coil or Vape

If your device still tastes burnt after priming, resting, and cleaning, the damage might be permanent. Signs it’s time to replace:

  • Persistent burnt or metallic taste
  • Vapor production is weak or inconsistent
  • Gurgling or leaking from the coil

For disposable vapes, there's no fix—once the coil is burnt, the whole device needs replacing.

Conclusion

If you're wondering how to unburn a vape, your best shot lies in early detection and immediate action. While it’s not always reversible, especially with disposables, taking the right steps with refillable devices can save your coil and your flavor. For long-term satisfaction, prevention is key—so stay mindful of your vaping habits and device maintenance.

FAQs

1. Can you fix a burnt vape coil?

Fixing a burnt vape coil depends on the extent of the damage. If the coil is only slightly burnt due to a dry hit, letting it rest and priming it with e-liquid might restore the flavor. However, if the wick is completely scorched and the burnt taste persists, the coil needs to be replaced.

2. Why does my vape taste burnt even with a new coil?

A vape may still taste burnt after installing a new coil if the coil wasn't primed properly. Always saturate the coil by dripping a few drops of e-liquid directly onto the cotton and letting it sit for 5–10 minutes before use. Vaping at wattages that are too high can also cause instant burning.

3. How long should I wait after priming a coil?

After priming a coil, it’s best to wait at least 5–10 minutes before vaping. This allows the wick to fully absorb the e-liquid. For thicker e-liquids (high VG), waiting a full 10–15 minutes is recommended to prevent dry or burnt hits.

4. Can you fix a burnt disposable vape?

While disposable vapes are difficult to repair, you can sometimes reduce the burnt taste by letting the device rest upright for 20–30 minutes. This may allow residual e-liquid to re-saturate the wick. However, if the coil is severely burnt, there's no way to fix it, and the device should be replaced.

5. How do I prevent my vape from burning again?

To avoid burnt hits in the future:

  • Prime new coils properly before use.
  • Refill tanks or pods before they run dry.
  • Avoid chain vaping to give the wick time to reabsorb e-liquid.
  • Use appropriate wattage settings based on the coil's rating.
  • Store the vape upright when not in use to keep the wick saturated.